912F0111-1 of Syn Tech Systems Inc under NSN 5340-01-385-7014

Part Number: 912F0111-1

Alternate P/N: 912F01111

Manufacturer: Syn Tech Systems Inc

NSN: 5340-01-385-7014

NIIN: 013857014

Item Name : Clamp Block Section

CAGE Code: 56672

FSC: 5340 Hardware Commercial

FSG: 53 Hardware and Abrasives

Country: USA

NCB Code: 01

Thank you for taking an interest in our selection of 5340-01-385-7014 parts here on Boost AOG. You are currently on the RFQ form for part number 912F0111-1, a Syn Tech Systems Inc product listed with the Clamp Block Section If part number 912F0111-1 catches your eye, be sure to use our online RFQ service to request quotes, with customized responses provided within 15 minutes of us receiving and reviewing a completed submission.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure the quality of our NSN components, we adhere to a strict NO CHINA SOURCING pledge, meaning every purchased item will be delivered alongside any pertinent qualifying certifications or manufacturing trace documentation for your benefit. Paired with numerous other commitments, we proudly operate with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. If you happen to be facing a time constraint and require NSN parts quickly, contact us at your earliest convenience, and we will discuss the expedited shipping options we have available for domestic and international customers alike. With our various dedications in mind, kick off procurement for Syn Tech Systems Inc part number 912F0111-1 and other Clamp Block Section products today.

NSN Information for Part Number 912F0111-1 with NSN 5340-01-385-7014, 5340013857014

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-385-7014 Item PartTypeName: CLAMP,BLOCK,SECTION	5340	013857014	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
912F0111-1	5	2	3

Characteristics Data of NSN 5340-01-385-7014, 5340013857014

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	5.392 INCHES NOMINAL
ABMK	OVERALL WIDTH	0.750 INCHES NOMINAL
ABTB	MOUNTING HOLE DIAMETER	0.875 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
ABTJ	MOUNTING HOLE QUANTITY	2
AFEC	DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH	0.375 INCHES NOMINAL
CWWM	CLAMPING HOLE DIAMETER	0.875 INCHES MINIMUM ALL HOLES AND 0.880 INCHES MAXIMUM ALL HOLES
CWTD	CLAMPING HOLE QUANTITY	1
CWXC	DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER	0.420 INCHES NOMINAL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625TY3CL1 MIL SPEC SINGLE TREATMENT RESPONSE
BYGG	BLOCK HEIGHT	0.870 INCHES NOMINAL
MATT	MATERIAL	ALUMINUM ALLOY 6061
SFTT	SURFACE TREATMENT	ANODIZE
AZGM	MOUNTING FACILITY	UNTHREADED HOLE
CWXN	DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER	1.112 INCHES NOMINAL
FEAT	SPECIAL FEATURES	THD INSERT RIGHT END 0.312-24UNF
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/11-T6 FED SPEC SINGLE MATERIAL RESPONSE
STYL	STYLE DESIGNATOR	RECTANGULAR