Thank you for taking an interest in our selection of 4920-01-327-2490 parts here on Boost AOG. You are currently on the RFQ form for part number 3C3647G01, a General Electric Company product listed with the Fixture Set Aircraf If part number 3C3647G01 catches your eye, be sure to use our online RFQ service to request quotes, with customized responses provided within 15 minutes of us receiving and reviewing a completed submission.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure the quality of our NSN components, we adhere to a strict NO CHINA SOURCING pledge, meaning every purchased item will be delivered alongside any pertinent qualifying certifications or manufacturing trace documentation for your benefit. Paired with numerous other commitments, we proudly operate with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. If you happen to be facing a time constraint and require NSN parts quickly, contact us at your earliest convenience, and we will discuss the expedited shipping options we have available for domestic and international customers alike. With our various dedications in mind, kick off procurement for General Electric Company part number 3C3647G01 and other Fixture Set Aircraf products today.
| MRC | Criteria | Characteristic |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | F110-GE-100 & F101-GE-102 ENGINE |
| FTLD | III FUNCTIONAL DESCRIPTION | USED TO ACCOMPLISH THE REPAIRS BY POSITIONING THE SHAFT,COVERING UNSPRAYED AREAS TO PREVENT OVERSPRAY AND PROVIDING FOR PLACEMENT OF TEST COUPONS TO MONITOR SPRAY PARAMETERS; USED FOR SEAL TEETH RESTORATION ON OUTER DIAMETER; IN ADDITION IT IS USED TO MASK THE SEAL TEETH DURING GRIT BLASTING - IN PREPARATION FOR THERMAL SPRAY |
| RDAL | III REFERENCE DATA AND LITERATURE | SERD NO. 1516A |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | FIXTURE SET |
| FEAT | SPECIAL FEATURES | CONSISTS OF A STEEL BASE PLATE WITH A MACHINED PILOT RING THAT IS WELDED ONTO THE PLATE AND INTERFACES WITH THE INSIDE DIAMETER OF THE SHAFT; BASE PLATE HAS 2 PIN HOLES; A STAINLESS STEEL CONICAL SHAPED TUBE IS BOLTED TO A TOP PLATE; A LONG STUD WITH A PINNED KNOB; A STAINLESS STEEL ANGLE RING BOLTED TO THE BASE PLATE; TEST COUPONS LOCATED ON THE TOP OF THE FIXTURE; 2 FOUND BOND TEST BUTTONS WHICH ARE HELD IN PLACE BY 2 TEFLON HOLDERS; FLAT PLATE COUPONS HELD IN PLACE BY 4 TEFLON HOLDERS; THIS ITEM IS 14.700 INCH BY 14.700 INCH BY 5.000 INCH AND WEIGHS APPROXIMATELY 34 POUNDS |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
