AN946RE3M6-2N of Aeronautical Standards Group under NSN 3110-00-766-6924

Part Number: AN946RE3M6-2N

Alternate P/N: AN946RE3M62N

Manufacturer: Aeronautical Standards Group

NSN: 3110-00-766-6924

NIIN: 007666924

Item Name : Bearing Ball Rod End

CAGE Code: 88044

FSC: 3110 Bearings Antifriction Unmounted

FSG: 31 Bearings

Country: USA

NCB Code: 00

Thank you for taking an interest in our selection of 3110-00-766-6924 parts here on Boost AOG. You are currently on the RFQ form for part number AN946RE3M6-2N, a Aeronautical Standards Group product listed with the Bearing Ball Rod End If part number AN946RE3M6-2N catches your eye, be sure to use our online RFQ service to request quotes, with customized responses provided within 15 minutes of us receiving and reviewing a completed submission.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure the quality of our NSN components, we adhere to a strict NO CHINA SOURCING pledge, meaning every purchased item will be delivered alongside any pertinent qualifying certifications or manufacturing trace documentation for your benefit. Paired with numerous other commitments, we proudly operate with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. If you happen to be facing a time constraint and require NSN parts quickly, contact us at your earliest convenience, and we will discuss the expedited shipping options we have available for domestic and international customers alike. With our various dedications in mind, kick off procurement for Aeronautical Standards Group part number AN946RE3M6-2N and other Bearing Ball Rod End products today.

NSN Information for Part Number AN946RE3M6-2N with NSN 3110-00-766-6924, 3110007666924

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-00-766-6924 Item PartTypeName: BEARING,BALL,ROD END	3110	007666924	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
AN946RE3M6-2N	6	1	C			A

Characteristics Data of NSN 3110-00-766-6924, 3110007666924

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AGGY	SHANK THREAD LENGTH	0.7190 INCHES MINIMUM AND 0.7810 INCHES MAXIMUM
AGYW	BEARING SEAL TYPE	CONTACT
CMLP	THREAD QUANTITY PER INCH	24
CRTL	CRITICALITY CODE JUSTIFICATION	FEAT
CTLK	SELF-ALIGNMENT ANGLE	10.00 DEGREES NOMINAL
FEAT	SPECIAL FEATURES	THIS ITEM HAS BEEN DETERMINED TO BE A CRITICAL APPLICATION ITEM. IN-FLIGHT FAILURE OF THIS ITEM WOULD CREATE A HAZARDOUS CONDITION
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	STEEL COMP E52100 INNER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING
SFTT	SURFACE TREATMENT	CADMIUM OUTER RING
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
THSD	THREAD SERIES DESIGNATOR	UNJF
AAZE	SHANK DIAMETER	0.3750 INCHES NOMINAL
AAZF	SHANK STYLE	EXTERNALLY THREADED
ABHP	OVERALL LENGTH	1.7505 INCHES MINIMUM AND 1.7805 INCHES MAXIMUM
ABXV	BORE DIAMETER	0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM
AGVT	OUTER RING WIDTH	0.3180 INCHES MINIMUM AND 0.3380 INCHES MAXIMUM
AGVU	INNER RING WIDTH	0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
AGXH	LENGTH FROM BORE CENTER TO SHANK END	1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM
AGYJ	SEAL QUANTITY	2
AGZA	ALIGNMENT TYPE	SELF-ALIGNING
AHAW	SELF-ALIGNMENT LOCATION	INTERNAL
CQJX	NOMINAL THREAD SIZE	0.375 INCHES
LBMA	LUBRICATION MATERIAL	GREASE
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE SEAL
MATT	MATERIAL	STEEL COMP 4130 OUTER RING
MATT	MATERIAL	STEEL COMP 4130 SHAFT
MATT	MATERIAL	STEEL COMP E52100 BALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHAFT
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING
SFTT	SURFACE TREATMENT	CADMIUM ROD END BODY
STYL	STYLE DESIGNATOR	DOUBLE ROW,STAGGERED,BALL